Constructing large-capacity vertical storage tanks (typically ranging from 1,000 m³ to 100,000 m³ under API 650 standards) presents significant engineering, safety, and scheduling challenges. Historically, contractors relied on bottom-up construction using extensive scaffolding. Today, modern heavy-industrial engineering overwhelmingly favors the Top-Down Hydraulic Jacking Method.
How the Hydraulic Jacking Method Works
Unlike conventional construction-which builds from the bottom shell course upward-the hydraulic jacking technique reverses the assembly sequence:
Foundation & Bottom Plate Welding: The tank bottom plates are laid out and welded on the prepared civil foundation.
Top Course & Roof Assembly: The uppermost shell ring and the entire roof structure (cone roof, dome roof, or floating roof) are assembled and welded at ground level.
Hydraulic Lifting: Synchronized hydraulic jacks mounted evenly along the interior perimeter lift the completed roof and top shell ring to the height of one shell plate width.
Sequential Ring Addition: The next lower shell ring is fitted, tacked, and welded beneath the suspended upper section. This cycle repeats until the final bottom ring is welded to the tank floor.

Engineering & Economic Comparison Matrix
| Evaluation Metric | Hydraulic Jacking Method (Top-Down) | Traditional Scaffolding Method (Bottom-Up) |
| Worker Safety | High: Over 85% of welding and grinding occurs at ground level, eliminating high-altitude fall risks. | Moderate to Low: Requires extensive work on elevated scaffolding exposed to wind and weather. |
| Weld Quality & NDT | Superior: Ground-level automatic girth welding machines achieve higher consistency and lower defect rates. | Variable: Manual welding at height is susceptible to wind interference and operator fatigue. |
| Construction Speed | Fast: Parallel roof assembly and continuous ground-level welding reduce total schedule by 25%–35%. | Slower: Sequential scaffolding erection and dismantling create significant schedule bottlenecks. |
| Equipment & Labor Cost | Optimized: Eliminates massive scaffolding rental costs and reduces skilled high-altitude labor requirements. | High: Substantial expenditure on scaffolding materials, cranes, and safety rigging. |
Key Selection Criteria for Project Owners
For projects involving large water reserves, crude oil tank farms, and chemical terminals, specifying hydraulic jacking erection alongside CNC-prefabricated shell kits ensures superior geometric roundness, stricter weld integrity, and lower total installed cost. Learn more about large tank fabrication and erection technologies at Zhongneng Huajian.


