Carbon steel storage tanks are used for storing concentrated sulfuric acid:
At a certain temperature, the corrosion rate of dilute sulfuric acid on carbon steel increases with increasing concentration. After reaching a certain concentration, the corrosion rate decreases sharply with increasing concentration. For concentrated sulfuric acid with a concentration above 80% and a temperature below 60℃, carbon steel and cast iron have good corrosion resistance, but it is not suitable for flowing sulfuric acid. Flow rates exceeding 0.67 m/s can cause turbulent corrosion, especially at the inlet and outlet of pipelines.
Concentrated sulfuric acid with a mass fraction greater than 70% can cause passivation when in contact with iron. Concentrated sulfuric acid oxidizes the surface of the steel, forming an oxide layer. Because there is very little water in concentrated sulfuric acid, there are no free ions. The oxide layer will not be further oxidized or corroded. Therefore, using carbon steel storage tanks is perfectly acceptable, but a certain corrosion allowance should be provided.
Due to the hygroscopic nature of concentrated sulfuric acid, moisture protection is essential when storing it in carbon steel tanks. Desiccants can be added to the tank's vent line, and large carbon steel tanks can be nitrogen-blanketed to isolate moisture.
The use of carbon steel storage tanks for concentrated sulfuric acid is also closely related to other operating conditions.
Xin Kaihe's carbon steel storage tanks, seamless plastic storage tanks, road transport tank containers, and ship transport storage tanks are manufactured using internationally advanced rotational molding technology, resulting in products with advantages such as integral one-piece molding without welding seams, impact resistance, aging resistance, light weight, no leakage, acid and alkali resistance, long service life, and compliance with hygiene standards.


