Production
1. Suitable for Molding Large and Extra-Large Parts
Most plastic molding processes place the plastic and mold under considerable pressure during the molding process. Examples include widely used injection molding, compression molding, extrusion, and blow molding. Therefore, when using these processes to produce large plastic parts, not only must molds capable of withstanding high pressure be used, making them bulky and complex, but the plastic molding equipment must also be designed and manufactured to be extremely robust, increasing the difficulty and cost of mold processing and manufacturing. In contrast, rotational molding of corrosion-resistant storage tanks only requires the frame to be strong enough to support the weight of the material, mold, and frame itself, as well as the mold-closing force to prevent material leakage. Therefore, even for large and extra-large plastic parts like corrosion-resistant storage tanks, rotational molding does not require extremely heavy equipment and molds. Mold processing and manufacturing are very convenient, with short manufacturing cycles and low costs.
1. Theoretically, there is almost no upper limit to the size of parts molded using rotational molding. However, it is easily limited by production conditions and road transportation. Producing such large plastic containers using blow molding would be impossible without extremely expensive and bulky blow molding equipment.
2. Rotational molding is suitable for the production of various types of small-batch plastic products, including corrosion-resistant storage tanks. Because the molds used in rotational molding are not subjected to external forces, they are simple, inexpensive, and easy to manufacture. Furthermore, rotational molding equipment offers significant flexibility; a single machine can accommodate one large mold or multiple smaller molds. It can mold parts of varying sizes and shapes simultaneously, as long as the raw materials used are the same and the product thickness is comparable. Therefore, rotational molding of corrosion-resistant storage tanks offers greater flexibility compared to other molding methods. 3. Rotational molding allows for easy color changes. Material is added directly to the mold each time, ensuring complete material entry into the product. Material is added only after the product is removed from the mold for the next molding cycle. Therefore, when changing the color, no material is wasted, and there is no need to spend time cleaning the machine and molds. When using multiple molds to rotomold the same plastic product, different colored materials can be added to different molds to simultaneously produce plastic products of different colors.
Processing
(1) Processing technology of polyethylene storage tanks: Horizontal polyethylene (PE) storage tanks are made from pure polyethylene (linear low-density polyethylene LLDPE, high-density polyethylene HDPE) as raw material, and are integrally molded in one piece using the rotomolding process.
(2) Processing technology of steel-lined plastic storage tanks: Vertical steel-lined plastic storage tanks, also known as tortoise-shell lined storage tanks (tortoise-shell lining-steel, mesh, and plastic in one), are the essence of steel-plastic composite products. They employ a special rotomolding process. This involves welding a steel mesh (tortoise shell) to the surface of the steel body, using pure polyethylene (linear low-density polyethylene LLDPE, high-density polyethylene HDPE) as raw material, and using the rotomolding process to organically combine the steel plate, steel mesh (tortoise shell), and polyethylene into one unit. The polyethylene firmly adheres to the surface of the steel body. The product has advantages such as no welding seams, no leakage, non-toxicity, anti-aging, impact resistance, corrosion resistance, long service life, and compliance with hygiene standards. It overcomes the shortcomings of all-plastic rotational molding tanks, such as poor rigidity, lack of pressure resistance, and poor temperature resistance.


